Well, it's been a while since the last post, and a lot has gotten done. The rub rail is completely done, and besides putting a varnish on will not be changed. After the rub rails were put on (which was a three session process because it included three layers of extra plywood) and rounded, we epoxied it and the entire inside of the boat, so now the inside is completely done with the exception of the seat tops which are finished but just need to be attached. With the help of my dad and grandpa, I fliped the boat over, and got to sanding the outer seam which is necessary because the next step is to lay fiberglass on the outer seams. Overall it is looking fantastic and the job is in the home stretch now.